m³/h to L/s Converter
Convert cubic metres per hour to litres per second (m³/h to L/s) with the exact formula, a quick answer, a conversion table and the working shown step by step.
Convert cubic metres per hour to litres per second
Livem³/h to L/s formula
Divide by 3.6 to go the other way.
The reverse formula is m³/h = L/s × 3.6. Both expressions use the same fixed relationship, so converting a value and then converting it back returns the original value (up to display rounding).
Step-by-step: 1 cubic metre per hour to litres per second
- Start with 1 m³/h.
- Multiply by the conversion factor 0.2777777778:1 × 0.2777777778 = 0.2777777778
- Result: 0.2777777778 L/s.
Cubic Metres per Hour to Litres per Second conversion table
| m³/h | L/s |
|---|---|
| 0.5 | 0.1388888889 |
| 1 | 0.2777777778 |
| 2 | 0.5555555556 |
| 5 | 1.388888889 |
| 10 | 2.777777778 |
| 20 | 5.555555556 |
| 25 | 6.944444444 |
| 50 | 13.88888889 |
| 100 | 27.77777778 |
| 500 | 138.8888889 |
| 1,000 | 277.7777778 |
Used for ventilation, gas and water systems.
One thousandth of a cubic metre per second, common in plumbing.
How to convert cubic metres per hour to litres per second
Multiply the number of cubic metres per hour by 0.2777777778. Here are a few worked values:
- 2 m³/h = 0.55555556 L/s
- 5 m³/h = 1.3888889 L/s
- 10 m³/h = 2.7777778 L/s
- 50 m³/h = 13.888889 L/s
Do not confuse flow rate with velocity. Flow rate is volume per time (L/min); velocity is distance per time (m/s). The link between them depends on the pipe's cross-sectional area. Also, US and UK gallons differ.
Related conversions
Frequently asked questions
How many litres per second are in one cubic metre per hour?
How do I convert cubic metres per hour to litres per second?
What is 10 cubic metres per hour in litres per second?
Is one cubic metre per hour bigger than one litre per second?
Are these conversions exact?
Factors on this page follow the definitions and guidance of the bodies below. Where a unit is a convention rather than a fixed definition, the page states the value used.
- BIPM — The International System of Units (SI Brochure, 9th edition)Primary definition of the seven SI base units and derived units.
- NIST Special Publication 811 — Guide for the Use of the International System of UnitsRules for writing and converting SI values, including rounding and significant figures.
- NIST CODATA — Recommended values of the fundamental physical constantsConstants used in physics and chemistry calculations, updated as CODATA values change.
- International Electrotechnical Commission (IEC)International standards for electrical quantities and binary prefixes used on the data converter.
How these are used: sources and standards.
Understand the flow rate behind the number
Go from a conversion to the formula, the calculator, and the concept.