Conversion library

Flow rate converter

Convert volumetric flow rates for plumbing, HVAC, pumps, rivers and industrial processes. The converter handles metric and US customary units.

7 units20 pagesExact factors

Flow rate converter

Live
Value Result 1,000 L/s
Quick answer
1 m³/s = 1,000 L/s
Pick any two units in the category — the result updates instantly.

The flow rate conversion formula

Formula
value in cubic metre per second = value × conversion factor

Every unit in this category is defined by a fixed factor relative to the cubic metre per second (m³/s).

Volumetric flow rate is volume per unit time. One cubic metre per second is 1,000 litres per second. One US gallon per minute is about 0.00006309 m³/s, or 3.785 litres per minute.

Convert step by step

Choose the unit you have, enter a value, and the converter multiplies by the correct factor. For units with offsets (temperature) or inverse relationships (fuel economy), it applies the full formula rather than a single factor. The equation under the result shows exactly what happened.

Common mistake

Do not confuse flow rate with velocity. Flow rate is volume per time (L/min); velocity is distance per time (m/s). The link between them depends on the pipe's cross-sectional area. Also, US and UK gallons differ.

All flow rate conversions

Open any pair for a dedicated page with the reverse formula, a conversion table and worked examples.

Unit reference

Flow rate units and factors
UnitSymbolFactor to m³/sDefinition
cubic metre per secondm³/s1The SI unit of volumetric flow rate.
litre per secondL/s0.001One thousandth of a cubic metre per second, common in plumbing.
litre per minuteL/min0.000017A common pump and tap flow unit, equal to 1/60 L/s.
cubic metre per hourm³/h0.00027777778Used for ventilation, gas and water systems.
cubic foot per secondft³/s0.028316847Used for rivers and large air systems, about 28.317 L/s.
cubic foot per minuteft³/min0.00047194744CFM, commonly used for fans and air conditioning.
US gallon per minuteGPM0.000063About 3.785 litres per minute, used in plumbing and pumps.

“Special” means the unit needs a formula with an offset or an inverse relationship rather than a single multiplier.

Frequently asked questions

How many litres per minute are in 1 GPM?
One US gallon per minute is about 3.785 litres per minute.
How many m³/h are in 1 L/s?
One litre per second is exactly 3.6 cubic metres per hour.
How do I convert flow rate to velocity?
Divide flow rate by the pipe's cross-sectional area, using consistent units.
How many units are in the flow rate converter?
The converter includes 7 units and 20 dedicated conversion pages among the most-used units. Every unit is defined in the reference table on this page.
How precise are the results?
Fixed conversion factors are exact; results are displayed to eight significant figures. Use the step-by-step working to see the factor and arithmetic used.
Can I convert the other direction?
Yes. Every conversion page has a reverse link, and the swap button switches the units instantly.
Sources and standards

Factors on this page follow the definitions and guidance of the bodies below. Where a unit is a convention rather than a fixed definition, the page states the value used.

How these are used: sources and standards.

FormulasWorld

Go beyond flow rate conversion

Use the formula library and science calculators to understand what the number means.