Angle converter

Turn to Gradian Converter

Convert turns to gradians (turn to gon) with the exact formula, a quick answer, a conversion table and the working shown step by step.

Quick answer1 turn = 400 gradiansat 8 significant figures

Convert turns to gradians

Live
Value in turns
turn · turn
Result in gradians 400 gon
gon · gradian
Quick answer
1 turn = 400 gon
Using the exact conversion factor 400.
Reverse

turn to gon formula

Conversion formula
gon = turn × 400

Divide by 0.0025 to go the other way.

The reverse formula is turn = gon × 0.0025. Both expressions use the same fixed relationship, so converting a value and then converting it back returns the original value (up to display rounding).

Step-by-step: 1 turn to gradians

  1. Start with 1 turn.
  2. Multiply by the conversion factor 400:1 × 400 = 400
  3. Result: 400 gon.

Turns to Gradians conversion table

turn → gon
turngon
0.5200
1400
2800
52,000
104,000
208,000
2510,000
5020,000
10040,000
500200,000
1,000400,000
turn · turn

One complete revolution, equal to 360 degrees or 2π radians.

gon · gradian

One 400th of a full turn, used in some surveying systems.

How to convert turns to gradians

Multiply the number of turns by 400. Here are a few worked values:

  • 2 turn = 800 gon
  • 5 turn = 2,000 gon
  • 10 turn = 4,000 gon
  • 50 turn = 20,000 gon
Watch out

Many calculators and programming languages expect radians, not degrees. Mixing them up is a common source of wrong trigonometric results. Also, gradians (400 per turn) are not the same as gradients or slopes.

Related conversions

Frequently asked questions

How many gradians are in one turn?
One turn equals 400 gradians.
How do I convert turns to gradians?
Use the formula gon = turn × 400. For example, 10 turns = 4,000 gradians. The converter above does the arithmetic instantly and shows the factor used.
What is 10 turns in gradians?
10 turns equals 4,000 gradians.
Is one turn bigger than one gradian?
Yes. One turn is equal to 400 gradians, so a single turn represents more gradians.
Are these conversions exact?
The conversion factors are exact for units with fixed definitions (for example, 1 inch = 25.4 mm). Results are displayed to 8 significant figures, so very small rounding differences can appear in the last digit. Average months, years, Mach and some fuel-economy values are conventional rather than exact.
Sources and standards

Factors on this page follow the definitions and guidance of the bodies below. Where a unit is a convention rather than a fixed definition, the page states the value used.

How these are used: sources and standards.

FormulasWorld

Understand the angle behind the number

Go from a conversion to the formula, the calculator, and the concept.