Metre to Kilometre Converter
Convert metres to kilometres (m to km) with the exact formula, a quick answer, a conversion table and the working shown step by step.
Convert metres to kilometres
Livem to km formula
Divide by 1,000 to go the other way.
The reverse formula is m = km × 1,000. Both expressions use the same fixed relationship, so converting a value and then converting it back returns the original value (up to display rounding).
Step-by-step: 1 metre to kilometres
- Start with 1 m.
- Multiply by the conversion factor 0.001:1 × 0.001 = 0.001
- Result: 0.001 km.
Metres to Kilometres conversion table
| m | km |
|---|---|
| 0.5 | 0.0005 |
| 1 | 0.001 |
| 2 | 0.002 |
| 5 | 0.005 |
| 10 | 0.01 |
| 20 | 0.02 |
| 25 | 0.025 |
| 50 | 0.05 |
| 100 | 0.1 |
| 500 | 0.5 |
| 1,000 | 1 |
The SI base unit of length, defined by the speed of light in vacuum.
One thousand metres, the standard unit for road distances in most countries.
How to convert metres to kilometres
Multiply the number of metres by 0.001. Here are a few worked values:
- 2 m = 0.002 km
- 5 m = 0.005 km
- 10 m = 0.01 km
- 50 m = 0.05 km
The most common length mistake is mixing up inches and feet, or treating a US survey foot as identical to the international foot. For everyday use they are close, but surveying uses a slightly different historical definition. Always check whether a recipe, drawing or specification is metric or imperial before converting.
Related conversions
Frequently asked questions
How many kilometres are in one metre?
How do I convert metres to kilometres?
What is 10 metres in kilometres?
Is one metre bigger than one kilometre?
Are these conversions exact?
Factors on this page follow the definitions and guidance of the bodies below. Where a unit is a convention rather than a fixed definition, the page states the value used.
- BIPM — The International System of Units (SI Brochure, 9th edition)Primary definition of the seven SI base units and derived units.
- NIST Special Publication 811 — Guide for the Use of the International System of UnitsRules for writing and converting SI values, including rounding and significant figures.
- NIST CODATA — Recommended values of the fundamental physical constantsConstants used in physics and chemistry calculations, updated as CODATA values change.
- International Electrotechnical Commission (IEC)International standards for electrical quantities and binary prefixes used on the data converter.
How these are used: sources and standards.
Understand the length behind the number
Go from a conversion to the formula, the calculator, and the concept.