Litre to Cubic Metre Converter
Convert litres to cubic metres (L to m³) with the exact formula, a quick answer, a conversion table and the working shown step by step.
Convert litres to cubic metres
LiveL to m³ formula
Divide by 1,000 to go the other way.
The reverse formula is L = m³ × 1,000. Both expressions use the same fixed relationship, so converting a value and then converting it back returns the original value (up to display rounding).
Step-by-step: 1 litre to cubic metres
- Start with 1 L.
- Multiply by the conversion factor 0.001:1 × 0.001 = 0.001
- Result: 0.001 m³.
Litres to Cubic Metres conversion table
| L | m³ |
|---|---|
| 0.5 | 0.0005 |
| 1 | 0.001 |
| 2 | 0.002 |
| 5 | 0.005 |
| 10 | 0.01 |
| 20 | 0.02 |
| 25 | 0.025 |
| 50 | 0.05 |
| 100 | 0.1 |
| 500 | 0.5 |
| 1,000 | 1 |
One cubic decimetre, used for drinks, fuel and laboratory volumes.
One thousand litres, used for water, concrete and bulk materials.
How to convert litres to cubic metres
Multiply the number of litres by 0.001. Here are a few worked values:
- 2 L = 0.002 m³
- 5 L = 0.005 m³
- 10 L = 0.01 m³
- 50 L = 0.05 m³
US and UK fluid ounces are not the same: 1 US fl oz ≈ 29.574 mL, while 1 UK fl oz ≈ 28.413 mL. A US cup is 236.588 mL, not 250 mL. When following a recipe, check the country of origin before converting cups or tablespoons.
Related conversions
Frequently asked questions
How many cubic metres are in one litre?
How do I convert litres to cubic metres?
What is 10 litres in cubic metres?
Is one litre bigger than one cubic metre?
Are these conversions exact?
Factors on this page follow the definitions and guidance of the bodies below. Where a unit is a convention rather than a fixed definition, the page states the value used.
- BIPM — The International System of Units (SI Brochure, 9th edition)Primary definition of the seven SI base units and derived units.
- NIST Special Publication 811 — Guide for the Use of the International System of UnitsRules for writing and converting SI values, including rounding and significant figures.
- NIST CODATA — Recommended values of the fundamental physical constantsConstants used in physics and chemistry calculations, updated as CODATA values change.
- International Electrotechnical Commission (IEC)International standards for electrical quantities and binary prefixes used on the data converter.
How these are used: sources and standards.
Understand the volume behind the number
Go from a conversion to the formula, the calculator, and the concept.