Angle converter

Gradian to Degree Converter

Convert gradians to degrees (gon to °) with the exact formula, a quick answer, a conversion table and the working shown step by step.

Quick answer1 gradian = 0.9 degreesat 8 significant figures

Convert gradians to degrees

Live
Value in gradians
gon · gradian
Result in degrees 0.9 °
° · degree
Quick answer
1 gon = 0.9 °
Using the exact conversion factor 0.9.
Reverse

gon to ° formula

Conversion formula
° = gon × 0.9

Divide by 1.1111111 to go the other way.

The reverse formula is gon = ° × 1.111111111. Both expressions use the same fixed relationship, so converting a value and then converting it back returns the original value (up to display rounding).

Step-by-step: 1 gradian to degrees

  1. Start with 1 gon.
  2. Multiply by the conversion factor 0.9:1 × 0.9 = 0.9
  3. Result: 0.9 °.

Gradians to Degrees conversion table

gon → °
gon°
0.50.45
10.9
21.8
54.5
109
2018
2522.5
5045
10090
500450
1,000900
gon · gradian

One 400th of a full turn, used in some surveying systems.

° · degree

One 360th of a full turn.

How to convert gradians to degrees

Multiply the number of gradians by 0.9. Here are a few worked values:

  • 2 gon = 1.8 °
  • 5 gon = 4.5 °
  • 10 gon = 9 °
  • 50 gon = 45 °
Watch out

Many calculators and programming languages expect radians, not degrees. Mixing them up is a common source of wrong trigonometric results. Also, gradians (400 per turn) are not the same as gradients or slopes.

Related conversions

Frequently asked questions

How many degrees are in one gradian?
One gradian equals 0.9 degrees.
How do I convert gradians to degrees?
Use the formula ° = gon × 0.9. For example, 10 gradians = 9 degrees. The converter above does the arithmetic instantly and shows the factor used.
What is 10 gradians in degrees?
10 gradians equals 9 degrees.
Is one gradian bigger than one degree?
No. One gradian is only 0.9 degrees, so it is smaller than one degree.
Are these conversions exact?
The conversion factors are exact for units with fixed definitions (for example, 1 inch = 25.4 mm). Results are displayed to 8 significant figures, so very small rounding differences can appear in the last digit. Average months, years, Mach and some fuel-economy values are conventional rather than exact.
Sources and standards

Factors on this page follow the definitions and guidance of the bodies below. Where a unit is a convention rather than a fixed definition, the page states the value used.

How these are used: sources and standards.

FormulasWorld

Understand the angle behind the number

Go from a conversion to the formula, the calculator, and the concept.