Square Foot to Square Inch Converter
Convert square feet to square inches (ft² to in²) with the exact formula, a quick answer, a conversion table and the working shown step by step.
Convert square feet to square inches
Liveft² to in² formula
Divide by 0.0069444444 to go the other way.
The reverse formula is ft² = in² × 0.006944444444. Both expressions use the same fixed relationship, so converting a value and then converting it back returns the original value (up to display rounding).
Step-by-step: 1 square foot to square inches
- Start with 1 ft².
- Multiply by the conversion factor 144:1 × 144 = 144
- Result: 144 in².
Square Feet to Square Inches conversion table
| ft² | in² |
|---|---|
| 0.5 | 72 |
| 1 | 144 |
| 2 | 288 |
| 5 | 720 |
| 10 | 1,440 |
| 20 | 2,880 |
| 25 | 3,600 |
| 50 | 7,200 |
| 100 | 14,400 |
| 500 | 72,000 |
| 1,000 | 144,000 |
Exactly 0.09290304 square metres, the standard US property area unit.
Exactly 6.4516 square centimetres, used for small surfaces and pressure.
How to convert square feet to square inches
Multiply the number of square feet by 144. Here are a few worked values:
- 2 ft² = 288 in²
- 5 ft² = 720 in²
- 10 ft² = 1,440 in²
- 50 ft² = 7,200 in²
Do not convert linear feet to square metres by a single factor — square the length factor. One square metre is about 10.7639 square feet, not 3.28084. Also, an acre is not a square of one side 100 m; that is a hectare.
Related conversions
Frequently asked questions
How many square inches are in one square foot?
How do I convert square feet to square inches?
What is 10 square feet in square inches?
Is one square foot bigger than one square inch?
Are these conversions exact?
Factors on this page follow the definitions and guidance of the bodies below. Where a unit is a convention rather than a fixed definition, the page states the value used.
- BIPM — The International System of Units (SI Brochure, 9th edition)Primary definition of the seven SI base units and derived units.
- NIST Special Publication 811 — Guide for the Use of the International System of UnitsRules for writing and converting SI values, including rounding and significant figures.
- NIST CODATA — Recommended values of the fundamental physical constantsConstants used in physics and chemistry calculations, updated as CODATA values change.
- International Electrotechnical Commission (IEC)International standards for electrical quantities and binary prefixes used on the data converter.
How these are used: sources and standards.
Understand the area behind the number
Go from a conversion to the formula, the calculator, and the concept.