Density converter
Convert density values for materials, fluids and gases. Density is mass per unit volume; specific gravity compares a substance with water.
Density converter
LivePopular density conversions
The density conversion formula
Every unit in this category is defined by a fixed factor relative to the kilogram per cubic metre (kg/m³).
The SI density unit is kilograms per cubic metre. Water is about 1,000 kg/m³ (1 g/cm³). One pound per cubic foot is about 16.0185 kg/m³. Specific gravity is a dimensionless ratio to water at 4 °C.
Convert step by step
Choose the unit you have, enter a value, and the converter multiplies by the correct factor. For units with offsets (temperature) or inverse relationships (fuel economy), it applies the full formula rather than a single factor. The equation under the result shows exactly what happened.
g/cm³ and kg/L are numerically identical, but kg/m³ is 1,000 times smaller. Do not drop the zeroes. For gases, density depends strongly on temperature and pressure, so always state the conditions.
All density conversions
Open any pair for a dedicated page with the reverse formula, a conversion table and worked examples.
From kilograms per cubic metre (kg/m³)
From grams per cubic centimetre (g/cm³)
From kilograms per litre (kg/L)
From pounds per cubic foot (lb/ft³)
Unit reference
| Unit | Symbol | Factor to kg/m³ | Definition |
|---|---|---|---|
| kilogram per cubic metre | kg/m³ | 1 | The SI unit of density. |
| gram per cubic centimetre | g/cm³ | 1,000 | Equal to 1,000 kg/m³; water is about 1 g/cm³. |
| gram per litre | g/L | 1 | Equal to 1 kg/m³, used for gases and dissolved substances. |
| kilogram per litre | kg/L | 1,000 | Equal to 1 g/cm³, used for liquids. |
| pound per cubic foot | lb/ft³ | 16.018463 | The imperial density unit, about 16.0185 kg/m³. |
| pound per cubic inch | lb/in³ | 27,679.905 | About 27,679.9 kg/m³, used for metals and engineering materials. |
| pound per US gallon | lb/gal | 119.82643 | About 119.826 kg/m³, used for fuels and liquids. |
“Special” means the unit needs a formula with an offset or an inverse relationship rather than a single multiplier.
Frequently asked questions
What is the density of water?
How many kg/m³ are in 1 g/cm³?
Is specific gravity the same as density?
How many units are in the density converter?
How precise are the results?
Can I convert the other direction?
Factors on this page follow the definitions and guidance of the bodies below. Where a unit is a convention rather than a fixed definition, the page states the value used.
- BIPM — The International System of Units (SI Brochure, 9th edition)Primary definition of the seven SI base units and derived units.
- NIST Special Publication 811 — Guide for the Use of the International System of UnitsRules for writing and converting SI values, including rounding and significant figures.
- NIST CODATA — Recommended values of the fundamental physical constantsConstants used in physics and chemistry calculations, updated as CODATA values change.
- International Electrotechnical Commission (IEC)International standards for electrical quantities and binary prefixes used on the data converter.
- NIST Chemistry WebBookThermochemical, spectroscopic and physical property data for chemical species.
- PubChem (NIH)Compound identifiers, molar masses and property records.
- IUPAC Gold BookAuthoritative definitions of chemical terms and units.
How these are used: sources and standards.
Go beyond density conversion
Use the formula library and science calculators to understand what the number means.